Recording Function
You can record sound of the CD, the Radio Broadcasting
or sound from the external source into the USB storage
device.
1. Connect the external USB storage device you want
to record to the USB ( ) on your player.
2. Play a Disc, tune to a station or connect the
external source to your player.
CD
• Press
theF buttontoselecttheMP3/CDfunction.
• Press
theOPEN/CLOSE buttontoopenthedisctray.
• Insert
aCDandpresstheOPEN/CLOSE buttonto
closethedisctray.
• Use t
heCDselection(
[
or
]
)buttonstoselectthe
desiredsong.
FM
• SelectFMbypressingtheFbuttononthemainunit.
• Tune to a stationyouwanttorecord.
External Source
• Conn
ectanExternalComponent/MP3playertoyour
player.
• Pres
stheFbuttontoselect<AUX>input.
• Pla
yasongfromtheexternaldevice.
3. Press the USB REC button to start recording.
CD
• “TRACK RECORDING” is displayedandCD
recording starts.
• Press andholdtheUSB RECbuttontostartrecording
thealltracksofDisc."FULLCDRECORDING"is
displayed.
• If you playtheMP3/WMAle,theleiscopiedintothe
USBdevicetotally.
“COPY XX”“COPY END” is displayed. When the
recording is done, “STOP” will be displayed.
• If thereisthesamelename,"FILEEXIST"is
displayed,andthefunctioniscanceled.
Tuner /External Source
• RECORDING is displayed
.
4. To stop recording, press the STOP (@) button and
then automatically create and save as the MP3 file.
5. To rem
ove the USB device safely, press the STOP (@)
button once again.
After the recording, a directory
named “RECORDING”(CD), “CD COPY”(MP3 CD),
“TUNER RECORDING” or “AUX RECORDING” will be
created in your device.
• Do not disconnect the USB or the AC Cord during the
recording as this may cause damage to the file..
• IfyoudisconnectedUSBdeviceduringarecording,the
mainunitwillbepoweredoffandyoumaynotdelete
therecordedle.Inthiscase,pleaseconnecttheUSB
devicetothePCandbackuptheUSBdataonthePC
rstandthenformattheUSBdevice.
Recording Speed
• When the USB memory has insufficient free space, it
will display “NOT ENOUGH MEMORY”.
• The recording works if the USB device or the HDD is
formatted in the FAT file system. (The NTFS file system is
not supported.)
• When you use CD high speed search function, the CD
recording doesn't work.
• Sometimes, the recording time may be longer with some
USB devices.
• In the program mode, you can't use the CD recording
function.
` The equalizer is set to "OFF" automatically and becomes
not available during a CD recording.
` The REPEAT function is set to "OFF" automatically and
becomes not available during a CD recording.
• If you use the MIC function during the CD recording, the
voice from the microphone will be recorded.
• You can not record the radio when searching or no
available frequencies in the Tuner mode.
• Note that setting the input level too loud when recording
music from an external device through the AUX and USB
channel may introduce noise into the recording. In that
case, lower the external device’s volume level.
You can select the recording speed before recording.
Each time you press the CD REC SPEED button
on the remote control, the recording speed will
change as follows:
RECORD SPD x 1
;
RECORD SPD x 4
• While the
TunerorExternalSourceisrecording,the
recordingspeeddoesnotsupported.
• Whe
nyouselectRECORD SPD x 4,theaudiosoundwill
notbeoutput.
• If you connected the Microphone, you just have one recording
speed mode: RECORD SPD x 1.
• During recording, if you disconnect the Microphone, the
recording will stop, even if you reconnect the Microphone, it
will still stop.
EQ
Your micro-compact
system supports the
predefined equalizer settings between high and low
frequencies to be in harmonious with the current
music genre.
Press the EQ button.
Each time you press this button, the sound mode
will
switch as following:
OFF
;
FLAT
;
RANCHA
;
SAMBA
;
CUMBIA
;
HABANA
;
BOOMBA
;
REGGAE
;
PARTY
;
POP
;
HIPHOP
;
ROCK
;
JAZZ
;
CLASS
;
STA+EQ
;
DYN+S
;
MP3+
;
VIR+S
.
SOUND Mode
• Theequalizerissetto"OFF"automaticallyand
becomesnotavailableduringaCDrecording.
• The EQmodemaybedifferentdependingonyour
region.