Samsung MM-L2 - Setting the Clock and CD Playback; Clock Setting Procedure; Displaying Current Time; Compact Disc Playback Basics

Your system is equipped with a clock which allows you to turn
your system on and off automatically. You should set the clock:
When you purchase the Micro component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1 Switch the system on by pressing On/Standby.
2 Press Timer/Clock twice.
Result: CLOCK is displayed.
3 Press Program/Set.
Result: The hour flashes.
4 To... Press...
Increase the hours
Decrease the hours
5 When the correct hour is displayed, press Program/Set.
Result: The minutes flash.
6 To... Press...
Increase the minutes
Decrease the minutes
7 When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the
system is in standby mode.
You can display the time, even when you are using another
function, by pressing Clock once.
This unit has been designed to playback the CDs: Audio CD, CD
Text, CD-R and CD-RW.
When you have loaded at least one compact disc into the
player, you can start listening to it.
Continued use of irregular shape CDs (heart-shape, octagonal,
etc.) can damage the unit.
1 Select the CD function by pressing CD on the front panel.
2 Open the compact disc compartment by pressing down and
releasing the cover.
3 Place your disc in the compartment, with the label on the disc
facing upwards.
4 Close the compartment by pushing down on the cover until it
clicks into place.
Result: The display indicates the number of tracks on the
disc.
5 Press the PLAY/PAUSE ( ) button.
Result: The first track on the disc plays and the track
number is displayed.
6 To stop playback temporarily, press the PLAY/PAUSE ()
button.
Press PLAY/PAUSE ( ) again to continue playing
the disc.
7 To start playing Press...
at the beginning of...
The next track SKIP/SEARCH once
The current track SKIP/SEARCH once
The previous track SKIP/SEARCH twice
The track of your choice SKIP/SEARCH or
the appropriate number of times
8 To search through Press and hold down...
the tracks...
Forwards SKIP/SEARCH until you
reach the required point
Backwards SKIP/SEARCH until you
reach the required point
You are advised to turn the volume down before using
this function.
9 Press the STOP ( ) button when you have finished.
GB
8
CD
CDCD
VOLl.
VOL.
Tuning
Mode
CD
CD
Setting the Clock
CDCD
VOLl.
VOL.
Tuning
Mode
On/Standby
Timer
on/off
EQ Preset S.Bass Mute
Sleep
Repeat
CD A B
+10 CD Repeat Shuffle
Mono/ST TUNER
Band
Program
/Set
Function
Timer
Clock
CD
CD
2
1
7
4
4
6
6
35
Listening to a Compact Disc
On/Standby
24
Band
Tuning Mode
Up
Down
Timer
Clock
Mute
EQ
S.Bass
TUNER
TAPE AUX
CD
1 5 6
9
56
78
78
When playing a CD-R or CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be
played back only if they are already “finalized”.
You can play back your original CD-Rs or CD-RWs recorded in
music CD format. (However, they may not be played back
depending on their characteristics or recording conditions.)
Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
CD-RWs may require a longer readout time. (This is caused by
the fact that the reflectance of CD-RWs is lower than for
regular CDs.)
CD
9