oven use
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “:0”,
“88:88” or “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24-hour
or 12-hour notation. You must set the clock:
•When you first install your microwave oven
•After a power failure
Do not forget to reset the clock when you switch to and from summer
and winter time.
Auto energy saving function
If you do not select any function when appliance is in the middle of
setting or operating with temporary stop condition, function is canceled
and clock will be displayed after 25 minutes.
Oven Lamp will be turned o after 5 minutes with door open condition.
1. To display the time in the...
24-hour notation
12-hour notation
Press the Clock (
) button once or twice.
2. Turn the Time/Weight ( ) dial to set the hour.
3. Press the Clock ( ) button.
4. Turn the Time/Weight ( ) dial to set the minute.
5. Press the Clock ( ) button.
COOKING/REHEATING
The following procedure explains how to cook or reheat food.
ALWAYS check your cooking settings before leaving the oven unattended.
First, place the food in the centre of the turntable. Then, close the door.
1. Select the power level to maximum by turning
COOKING POWER CONTROL knob.
(MAXIMUM POWER : 800 W)
2. Select the time by turning the Time/Weight (
)
dial.
Result : The oven light comes on and the
turntable starts rotating.
1) Cooking starts and when it has finished the oven beeps
4 times.
2) The end reminder signal will beep 3 times (once every
minute).
3) The current time is displayed again.
Never switch the microwave oven on when it is empty.
You can change the power level during cooking by turning the
COOKING POWER CONTROL knob.
MS23F301EAW_SW_EN.indd 13 29/07/2013 8:47:06
To Next Page
Loading...
Need help?
General
