E-15
ENGLISH
Setting the On Timer
You can set the indoor unit, which is connected to the wired
remote controller, to turn on at the pre-set time.
1
Press the button to set the On Timer.
Result: Default time (0.5 hour) will be displayed
and the ‘On’ indicator will blink.
If the On Timer is already set, current time will
be displayed and ‘On’ indicator will blink.
2
Press the
button until you set your desired time.
Result: You can set the time between 0.5~24 hours.
Note 0.5~3 hours : Time will be changed in 0.5 hour
unit each time you press the
button.
3~24 hours : Time will be changed in 1 hour
unit each time you press the
button.
3
Press button to set the time.
Result: ‘On’ indicator will stop blink.
When the pre-set time passes, indoor unit will
turn on automatically.
Operation mode, temperature, fan speed, air
flow direction will be same as the most recent
operation settings.
Note When the On Timer is set, you can cancel it by
pressing the button.
When the centralized control is set, Timer will not be
effective.
Timer will be canceled if you press either
or
button while the Timer is already set.
Timer will be canceled if you reset the wired remote
controller.
You can set one On Timer and Off Timer each.
Timer will be canceled if you turn on the wired remote
controller with button while the Timer is set.
MWR-WH02_IB_E_33323-1.indd 15 2011-01-10 오후 1:13:43
To Next Page
Loading...
Need help?
General
