Samsung MX-F730 - MICOM, MPEG Initialization & Update

4.Troubleshooting
4.3.MICOM,MPEGInitialization&Update
■MICOMReset
•DuringSTANDBYmode,pushthe‘STOP”Button5Seconds.IfVFDblinking,resetisnished.
■MicomUpdate(OnlyforFlashMicom)
•Method1)MAINPCBUTCN1forupdateJIG.ToupdateMICOM,itneedComputer,RomWriter,USBCables.
•Method2)InsertUSBMemory,andplay.“Update”willbedisplayed.Setwillbepoweroffwhennish.
•Method3)InsertUpdateDISC,andplay.“Update”willbedisplayed.Setwillbepoweroffwhennish.
■Micom&MPEGVersionCheck
1)PowerOn.
2)CDopenstatus.
3)PushthenumberNEXTfor5seconds,checktheMICOMversion.
4)PushthenumberPREVIOUSfor5seconds,checktheMPEGversion.
■MPEGUpdate
1)InsertUSBMemoryorUpdateDISCwhichhaveUpdatele,andplay.“Update”willbedisplayed.
2)WhennishtheSetwillbepoweroff→onautomatically.
3)AndthentheDeckisautomaticallyopen.
■MPEGReset
1)During“NoDisc”Displayed,pushthestopButton5seconds.Afterdisplayed“INITIALIZE”setwillpoweroff
automatically.
Copyright©1995-2013SAMSUNG.Allrightsreserved.4-7