Samsung mx-hs6500 - Cancelling the Timer; Listening to Radio; Selecting a Stored Station

14 English English 14
English 15
You can store up to:
15 FM stations.
1. Select FM by pressing the TUNER/AUX button.
2.
To sear
ch for
a station
Press the TUNING MODE button
Preset
One or more times until PRESET is
displayed. You can search the stored
frequencies in the Preset mode.
Manual
One or more times until MANUAL is
displayed. You can search the frequen-
cies one by one in the Manual mode.
3. Select the station to be stored by:
• Pressing t
heTUNING/ALBUM
,
or
.
buttononthe
remotecontroltoselectthepresetstation.
• P
ressandholdtheTUNING/ALBUM
,
or
.
button
ontheremotecontroltoautomaticallysearchforactive
broadcastingstations.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor re
ceptionarea,selectMONOfora
clear,interference-freebroadcast.
• This app lies only when listening to an FM station. 
5. If you do not want to store the radio station found,
return to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store additional radio frequencies, repeat Steps 3
through 5.
➣
In Tuner mode
• In the Manualmode,youcanusethe
[
or
]

button
onthemainunittomanuallysearchforaradiostation.
• In the Presetmode,youcanusethe
[
or
]
button
onthemainunittosearchforastoredradiostation.
You can listen to a stored radio station.
1. Select FM by pressing the TUNER/AUX button.
2. Press the TUNING MODE button on the remote
control until “ PRESET ” is displayed.
3. Pres s the [ or ] button on the main unit or the
TUNING/ALBUM , or . on the remote control to
select a desired preset number.
Selecting a Stored Station
Listening to Radio
After you have set the timer, the unit will start auto-
matically at the time shown by the TIMER indication
on the display. If you no longer want to use the timer,
you must cancel it.
To
Press the TIMER ON/OFF button....
Cancel the timer Once. Result: is no longer displayed.
Restart the timer Twice. Result: is displayed again.
• When youselecttheTIMEROFFmode,theTIMER
RECORDINGandTIMERfunctionarenotavailable.
Cancelling the Timer
9. Press the ENTER ( ) button.
Result: REC N is displayed. You can press the TUN-
ING/ALBUM , or . button to select REC Y or REC
N, and then press ENTER ( ) button.
1)
If you select REC N, the Product will not record when
it turns on. If you have already set a tuner timer
recording, selecting REC N cancels it. Note that the
Product will still turn on and off at the times you set
earlier in this procedure.
2)
If you select the REC Y, you can set the Product to
record when it turns on. The recording switch on and
switch off times can be different from the timer switch
on and off times you set earlier in this procedure.
a.
Press the ENTER ( ) button.
Result: ON is displayed for a few seconds. You can
set the tuner timer recording switch-on time.
b.
Press the ENTER ( ) button.
Result: OFF is displayed for a few seconds. You can
set the tuner timer recording switch-off time.
• The maximum tunertimerrecordingtimeis5hours.
• If the timer switchonandofftimesareidentical,the
wordERRORisdisplayed.
• When there is no disc in or USB connected to the
Product, if you select the "CD" or "USB", the Product
automatically selects "TUNER".
• You mayusethe
]
,
[
buttonsonthemainunit
insteadoftheTUNING/ALBUM
,
or
.
buttonto
adjustsettingsinSteps4through9.
• If the switch-onor-offtimeisthesameasthetimer
recordingtime,onlytheswitch-onor-offtimeis
effective,andthetimerrecordingtimeisnotapplied.
• If theautotimeristurnedon,theMP3/CDorUSB
functionmayrequireanadditionalsteptobeactivated
dependingonthedisc(ordevice).Itisbetterforyouto
selectthetunerfunctioninstead.