02 Getting Started
HDMI Function
Using Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet +
can be used by connecting this Hi-Fi component to a SAMSUNG TV using an HDMI Cable. This is only available with
SAMSUNG TVs and SAMSUNG AV Products that support Anynet+.
1. Connect the Hi-Fi component to a Samsung TV with an HDMI cable. (See page 10)
2. Set the Anynet+ function on your TV.
(See the TV instructions manual for more information.)
• You can operate the volume on the Hi-Fi component by using Volume buttons on the TV remote control.
✎ NOTE
` If you use an HDMI cable to connect a Samsung TV to your Hi-Fi component , you can operate
the Hi-Fi component using the TV’s remote control. This function is available only in connection
with Samsung TV and DVD player supporting Anynet + (HDMI-CEC).
` Please check your TV for the Anynet+ (HDMI-CEC) logo. If your TV has an Anynet+ (HDMI-CEC)
logo, then it supports the Anynet+ function.
` When you are making Anynet+ connection, do not connect more than two Hi-Fi component s
(Anynet+ installed). Otherwise, it can cause a malfunction.
` To used Anynet+(HDMI-CEC) function,Hi-Fi component's Anynet+ mode must be turned on.
` Press and hold Anynet+ button,turn Anynet+ on or turn Anynet+ off.
11 English
MX-HS6800-ZN-ENG-20140429.indd 11 2014/8/13 14:19:25
To Next Page
Loading...