Samsung MZ-5PA064 - System Requirement; Hardware Requirements; Software Requirements; Setting up and Configuring Your System

2 © 2010 Samsung Electronics
System Requirement
Check that you have the following required items before installing and using
DOS SSD FWD UTIL.
Hardware Requirements
System (Laptop/PC) needs to have at least two drives to update the firmware,
1. SSD drive requiring firmware upgrade
2. DOS Bootable USB drive with DOS SSD-FWD UTIL application
Software Requirements
DOS USB Bootable disk is required with DOS SSD-FWD UTIL Application
and supporting files.
Setting Up and Configuring Your System
Follow the steps below:
1. Create the DOS SSD application with Firmware Utility on DOS bootable USB
drive.
• Install the Samsung SSD Magician application on windows PC.
•Start SSD Magician application, Click Firmware Update menu on
SAMSUNG SSD MAGICIAN application.
OR
Right Click on SAMSUNG SSD MAGICIAN icon on system tray and select
Download New Firmware from the pop-up menu.