4 © 2010 Samsung Electronics
Figure 1: Firmware Update Solution
• Once the bootable disk creation is complete a message, “USB disk solu-
tion created successfully. Restart the PC and boot from USB for Firm-
ware Update.” is displayed. Click OK to complete the process.
2. Shut down the PC if it’s running any OS.
[Warning]: “DEVICE MUST BE PLUGGED IN AT ALL TIMES DURING
THE FIRMWARE UPDATE PROCESS OR ELSE DRIVE MAY BE
PERMANENTLY DAMAGED AND RENDERED INOPERABLE.”
"YOU MUST BACK UP ALL DATA ON THE DRIVE AS THE
FIRMWARE UPDATE PROCESS WILL CAUSE THE LOSS OF ALL
PRE-EXISTING DATA"
3. Re-boot the PC with DOS SSD FWD UTIL application on DOS bootable USB
drive.
4. DOS SSD application is launched automatically.
To Next Page
Loading...
