Samsung NP-N148P - Inserting and Ejecting a CD

59
Inserting and Ejecting a CD
1
Press the Eject button of the CD drive.
2
When the CD tray opens, insert a CD or DVD and push the tray in until it clicks.
3
Push the CD tray inward until it clicks.
The CD drive status indicator is turned on.
 A CD drive’s reading and writing speed may differ depending on the condition and
type of the media.
 To eject a CD when the CD drive does not work or the computer is off, place the end
of a paper clip (
) into the Emergency Hole until the CD tray is ejected.
Status Indicator
Eject Button
Emergency Hole