Samsung NP-N148P - Changing the Boot Priority

70
Changing the Boot Priority
This computer is congured to boot from an external-type ODD rst.
This chapter describes how to change the boot priority so that the computer boots from
the hard disk drive rst.
1
Select the Boot menu in the BIOS
Setup.
2
Press < Enter > on the Boot Device
Priority
item.
XXXXXXXX
3
Press the down key (↓) to move to the
IDE HDD item and press the F6 key to
move the item to the top.
[Boot priority order]
1. USB CD : N/A
2. IDE HDD : XXXXXXXX
3. PCI BEV : N/A
4. USB FDD : N/A
5. USB KEY : N/A
6. USB HDD : XXXXXXXX
7.
8.
[Excluded from boot order]
- USB ZIP : N/A
- USB LS120 : N/A
- PCI SCSI : N/A
- Other USB : N/A
- PCI : N/A
Boot Device Priority
4
Press the F10 key to save the settings
and exit Setup. The highest boot
priority device is now set to the Hard
Drive.