75
Using the Sound Recorder
The procedures to record sound using the Windows
Recorder are described below.
▶ For Windows 7/Vista
1
Connect a microphone to the microphone jack.
You can also use the internal MIC.
2
Right-click over the Volume icon on the taskbar
and select Recording Device.
3
Check if the microphone is set as the default
recording device.
If this is the case, it is already set as the default
device. If not, right-click over the microphone and
select Set default.
4
Click Start > All Programs > Accessories >
Sound Recorder and click Start recording to start
a recording.
▶ For Windows XP
1
Connect a microphone to the microphone jack.
You can also use the internal MIC.
2
Click Start > Control Panel > Sounds, Speech,
and Audio Devices > Sounds and Audio Devices.
3
Click Advanced from Volume and then, click
Options > Properties.
4
Select Realtek HD Audio input from the mixer
device to select Recording from Adjust Volume
for.
5
Select Mic Volume from Show the following
volume controls and click OK.
To Next Page
Loading...
