Samsung NP-P580 - Registering the TPM Program

81
1
When the TPM program installation is completed,
click Start > All Programs > Inneon Security
Platform Solution > Manage Security Platform >
User Settings. (with administrator authority)
Alternatively, double-click the icon on the
Taskbar and run initialization with administrator
authority.
2
The security authentication settings begin with the
Initialization Wizard. When the Initialization Wizard
appears, click Next.
If the status not initialized message appears, click
Yes.
If you backup the emergency recovery le to an
external storage device according to the instructions of
the Initialization Wizard, you can use the TPM security
device more safely.
3
Select a Security Platform Feature and set a basic
user password.
4
The Security Platform is now ready for construction.
Click Next to start constructing the Security
Platform.
5
If the Initialization Wizard completion window
appears, click Finish.
6
The user registration for the TPM program has been
completed. You can encrypt les and folders by
using the encryption le system, and use les and
folders to be encrypted by creating or copying them
to the virtual drive.
The virtual drive is created in the following location.
Registering the TPM program