Samsung NP-P580 - Installing the TPM Program

80
10
When the computer restarts automatically, the
Physical Presence operations screen appears.
Press Enter to set the value to Execute and
press Enter again.
11
Press the F10 key to save the changes. The
computer automatically restarts. Initialization of
the TPM chip has been completed. Now, install
the TPM program and register the TPM program.
You can install the TPM program as follows. Install the
program according to the procedures below.
This program is only provided for models with Samsung
Recovery Solution 4 and the TPM function.
1
Click Start > Samsung > Samsung Recovery
Solution 4 > Samsung Recovery Solution 4.
2
Click the System Software icon.
3
Click the System Software Installation icon.
4
Select TPM Host SW and click Install Now.
If the system software media is supplied with the product,
you can install the program by using the system software
media (only when supplied.)
Installing the TPM program
62/EQPHKIWTCVKQPEJCTIGYCUTGSWGUVGFVQ
5VCVG'PCDNG#EVKXCVG
016'
6JKUCEVKQPYKNNUYKVEJQPVJG62/
62/221RGTTCVKQP=%JQQUG#
2TGUU( VQ5CXGCPF4GU
2J[UKECN2TGUGPEGQRGTCVKQPU
%JQQUG#EVKQP
'ZGEWVG
4GLGEV
2TGUU(