Samsung NP-P580 - Page 79

79
5
When the computer restarts automatically, the
Physical Presence operations screen appears.
Press Enter to set the value to Execute and press
Enter again.
6
Press the F10 key to save the changes.
7
When the computer restarts automatically and the
Samsung logo screen appears, press the F2 key
repeatedly.
8
If the BIOS Setup screen appears, move to the
Security > TPM Support item, press Enter and
check if the value has been changed to Enabled. If
the value has not been changed, repeat the steps for
Initializing the TPM chip again.
9
Move to the TPM State > Change TPM State
item, press Enter and set the value to Enable &
Activated.
62/EQPHKIWTCVKQPEJCTIGYCUTGSWGUVGFVQ
5VCVG'PCDNG#EVKXCVG
016'
6JKUCEVKQPYKNNUYKVEJQPVJG62/
62/221RGTTCVKQP=%JQQUG#
2TGUU( VQ5CXGCPF4GU
2J[UKECN2TGUGPEGQRGTCVKQPU
%JQQUG#EVKQP
'ZGEWVG
4GLGEV
2TGUU(