Samsung OH75A - Power Control; Auto Power on; Max. Power Saving; Standby Control

82
Power Control
MENU mSystemPower ControlENTER E
Power Control
Auto Power On
Max. Power Saving


Power Button
Off
On
On
Off
Power On Only
– The displayed image may differ depending on the model.
Auto Power On

 Off / On
Max. Power Saving

 Off / On
Standby Control
When no signal is detected, it determines whether or not to enter sleep mode.
 Auto
The display stays off to save energy until working signals are detected even if there is an external device
connected.
The message No Cable Connected will appear if no source device is connected.
 Off
The message No Signal will appear if no input signals are detected.

If the message, "No Signal
and the settings of your source device.

If No Signal Message is set to Off, the No Signal message does not appear.
In this case, set No Signal Message to On.
 On
The display turns off to save energy if no input signals are detected.