20
Installing with enclosure unit
• When installing an enclosure unit close to the wall, maintain the clearance in order to secure air flow. Consult your provider for detailed requirements before installing the product. Excessive
heat due to the use of the enclosure unit with an obstacle or a wall may cause a malfunction or a problem with the product.
• Clearance for OH46F/OH55A/OH55F ( ): 100 mm or more
• Clearance for OH75A/OH75F/OH85F ( ): 200 mm or more
• Remove any obstacles near the inlet and outlet that may affect air flow.
"
If the unit is subjected to excess heat due to an insufficient gap, this may cause a malfunction, which will not be covered by the warranty.
Back
Wall or
obstacle
OH46F/OH55A/OH55F
Partition
Partition
Side view
Back
OH75A/OH75F/OH85F
Wall or
obstacle
Partition
Side view
Partition
To Next Page
Loading...
