Samsung P Series - Page 70

70
Chapter 5. Menu
System ▼
2nd 3rd Description
Network Standby This feature keeps the network power on when the product turns off.
Power Button The power button (on the top left corner of the remote control) can be set to either turn on the power or turn on/off
the power.
Eco Solution Energy Saving Mode Reduce the power consumption by adjusting the screen brightness.
Screen Lamp Schedule Adjust the panel brightness. A value closer to 100 makes the panel brighter.
No Signal Power Off Save power by turning the device off when no signal is received from any source.
• Disabled when an attached PC is in power saving mode.
• The product will automatically power off at a specied time. The time can be changed as required.
Auto Power Off The product will automatically turn off if you don’t press a button on the remote or touch a button on product front
panel within select hours to prevent overheating.
Temperature Control This function detects the internal temperature of the product. You can specify the temperature range that is
acceptable.
The default temperature is set to 171 °F (77 °C).
The recommended operating temperature for this product is 167 °F (75 °C) to 176 °F (80 °C) (based on an ambient
temperature of 104 °F (40 °C)).
• The screen will become darker if the current temperature exceeds the specied temperature limit. If the
temperature continues to rise, the product will power off to prevent overheating.
Input Device Manager Set the language, type and input language shortcut for a connected keyboard.
Play via Select the appropriate Play via mode depending on the environment where you are using the product.
The home screen may be different depending on the setting.
Change PIN The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Conrm New PIN.
• Default password: 0 - 0 - 0 - 0