27
ENGLISH
Option 4&( 4&( 4&( 4&( 4&( 4&(
&YQMBOBUJPO 1"(& .0%&
The option mode
you want to change
5IFUFOTEJHJUPGBO
PQUJPO4&(ZPVXJMM
change
The unit digit of an
PQUJPO4&(ZPVXJMM
change
Changed value
Remote
Controller
Display
On
Auto
On
Auto
Cool
On
Cool
On
On
Dry
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0D
Option
mode
_
5FOTEJHJU
PG4&(
_
6OJUEJHJU
PG4&(
_
The
changed
value
_'
You can change each digit of set option.
Option 4&( 4&( 4&( 4&( 4&( 4&(
&YQMBOBUJPO 1"(& .0%&
The option mode you
want to change
5IFUFOTEJHJUPGBO
PQUJPO4&(ZPVXJMM
change
The unit digit of an
PQUJPO4&(ZPVXJMM
change
Changed value
Indication 0 D 2 1 7 1
t 8IFODIBOHJOHBEJHJUPGBOJOEPPSVOJUBEESFTTTFUUJOHPQUJPOTFUUIF4&(BTA"
t 8IFODIBOHJOHBEJHJUPGJOEPPSVOJUJOTUBMMBUJPOPQUJPOTFUUIF4&(BTA
Ex) When setting the ‘buzzer control’ into disuse status.
Note
SEG 3, 4, 5, 6, 8, 9 additional information
8IFOUIF4&(JTTFUBTBOEGPMMPX"VUP$IBOHF0WFSGPS)3POMZPQFSBUJPOJUXJMMPQFSBUFBTGPMMPXT
$PPMJOH)FBUJOHNPEFDBOCFDIBOHFEXIFO5IFSNP0òTUBUVTJTNBJOUBJOFEEVSJOHUIFUJNFXJUI4&(
A : Set with SEG4
B : Set with SEG5
C : Set with SEG6
D : Set with SEG8
Cooling Thermo O
Heating Thermo O
Cooling Thermo On
Heating Thermo On
BC
D
Ts
A
c
a
Temp.
d
b
Standard temp.
for Heating
Standard temp.
for Cooling
Standard temp. for
Heating
→
Cooling
Standard temp.
for Cooling
→
Heating
Set temp.
for Auto mode
X If you are using heat pump model, mixed operation mode (two or more indoor units operating in different operation
mode simultaneously) is not available when the indoor units are connected to same outdoor unit. If you set the master
indoor unit with a remote controller, outdoor unit will operate in the mode which was set in the master indoor unit.
Changing a particular option