Samsung PL20 - Performing the Initial Setup

Basic functions 17
Performing the initial setup
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings.
1
Press [ POWER ].
• The initial setup screen appears when you turn on the camera
for the first time.
2
Press [ ] or [ ] to select Language and press
[
] or [ ].
Language
Time Zone
Date/Time Set
Date Type
Back Set
English
한국어
Français
Deutsch
Español
Italiano
3
Press [ ] or [ ] to select a language and press [ ].
4
Press [ ] or [ ] to select Time Zone and press
[
] or [ ].
5
Press [ ] or [ ] to select a time zone and press [ ].
• To set the daylight-saving time, press [ ].
Time Zone
London
[GMT +00:00] 2011/01/01 12:00 PM
Back DST
6
Press [ ] or [ ] to select Date/Time Set and press
[
] or [ ].
7
Press [ ] or [ ] to select an item.
Language :English
Time Zone :London
Date/Time Set :/ 01 /0 1
Date Type
Back Set
yyyy mm dd
2011
/ 01/01 12:00
8
Press [ ] or [ ] to set the date and time, and press
[
].
9
Press [ ] or [ ] to select Date Type and press
[
] or [ ].
Language :English
Time Zone :London
Date/Time Set
Date Type :mm/
Back Set
Off
dd/mm/yyyy
mm/dd/yyyy
yyyy/mm/dd
10
Press [ ] or [ ] to select a Date Type and press [ ].
11
Press [ ] to switch to Shooting mode.