Samsung PL20 - Using the Timer

Shooting options 37
Using the timer
Learn how to set the timer to delay shooting.
3
Press [Shutter] to start the timer.
• The AF-assist light/timer lamp blinks. The camera
automatically takes a photo at the specified time.
• Press [ ] to cancel the timer.
• Depending on the face detection option you have selected, the timer
function or some timer options may not be available.
• When you set burst options, you cannot use the timer function.
1
In Shooting mode, press [ ].
Off
2
Select an option.
Option Description
Off: The timer is not active.
10 Sec: Takes a photo in 10 seconds.
2 Sec: Takes a photo in 2 seconds.
Double: Takes a photo in 10 seconds, and then takes
another 2 seconds later.
Motion Timer: Detects your movement, and then takes
a photo. (p. 38)
The options may differ depending on the shooting mode.