Basic functions
24
Preventing your subject from being out of focus
It may be difficult to get your subject in focus when:
there is little contrast between the subject and background -
(When your subject is wearing a colour of clothing that is similar to the
background)
the light source behind the subject is too bright
-
the subject is shiny -
the subject includes horizontal patterns, such as blinds -
the subject is not positioned in the centre of the frame -
Use the focus lock
Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to take your photo.
When you take photos in low lightt
Turn on the flash.
(p. 38)
When subjects are moving fastt
Use the continuous
or motion capture
function. (p. 48)
To Next Page
Loading...
