Shooting options
50
Using burst modes
It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
In these cases, select one of the burst modes to take multiple pictures rapidly.
t You can use the flash, timer, and ACB only when you select
Single.
t When you select Motion Capture, the resolution is set to VGA
and the ISO speed is set to Auto.
t Depending on the face detection option you selected, some
burst options are not available.
1
In Shooting mode, press [ ].
2
Select Shooting Drive an option.
Option Description
Single: Take a single photo.
Continuous:
t While you are pressing [Shutter], the camera takes
photos continuously.
t The maximum number of photos depends on the
capacity of your memory card.
Motion Capture:
t While you are pressing [Shutter], the camera takes
VGA photos (5 photos per second; maximum of 30
photos).
AEB:
t Take 3 photos with different exposures: normal,
underexposed, and overexposed.
t Use a tripod to prevent blurry photos.
The options may differ depending on the shooting mode.
To Next Page
Loading...
