Playback/Editing
73
Printing photos with a PictBridge photo printer
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.
Configuring print settings
Images
Size
Layout
Type
Quality
Exit Print
: One Photo
: Auto
: Auto
: Auto
: Auto
Option Description
Images: Select whether to print the current photo or all
photos.
Size: Specify the size of the print.
Layout: Create thumbnail prints.
Type: Select the type of paper.
Quality: Set the printing quality.
Date: Set to print the date.
File Name: Set to print the name of the file.
Reset: Reset the print options.
Some options are not supported by some printers.
1
In Shooting mode, press [ ].
2
Select Settings USB.
3
Select Printer.
4
Connect your camera to your printer using the built-in
USB plug while your printer is on.
5
Turn on your camera.
t The printer recognizes the camera automatically.
6
Press [ ] or [ ] to select a photo.
t Press [ ] to set printing options.
See “Configuring print settings.”
7
Press [ ] to print.
t Printing starts. Press [ ] to cancel printing.
It is recommended that you use a USB extension cable, which is an optional
component, depending on the USB connection environment.
To Next Page
Loading...
