English - 7
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2 Press the (Power) button (On/Off) on the front of the television or press the POWER ()button on the remote
control to switch the television on. The programme that you were watching last is re-selected automatically.
If you have not yet stored any channels, no clear picture appears. Refer to “Storing Channels Automatically”
on page 9 or “Storing Channels Manually” on page 10.
➢
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to “Plug & Play Feature” on page 8.
3 To switch the television off, press the (Power) button (On/Off) on the front of the television.
Switching Your Television On and Off
Viewing the Menus
1 Press the MENU ()button.
The main menu is displayed on the screen.
Its left side has five icons: Input, Picture, Sound, Channel, and Setup.
2 Press the … or † button to select one of the icons.
Press the ENTER
()
button to access the icon’s sub-menu.
3 Press the … or † button to move to items in the menu.
Press the ENTER
()
button to enter items in the menu.
4 Press the …/†/œ/√ button to change the selected items.
Press the MENU ()button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
g
Move Enter Exit
Source List : TV √
Edit Name √
Input
TV
Freezing the Current Picture
You can freeze the picture when watching a television programme simply by
pressing the “STILL” button. To return to normal viewing, press it again.
➢
This function will automatically cancel after 5 minutes.
BN68-00955A-00Eng_0819 8/19/05 2:05 PM Page 7
To Next Page
Loading...
Need help?
General