English
Advanced Features
Anynet+
What is Anynet+?
8
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
1. Connect the HDMI IN (1(DVI), 2, 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
TV
Home Theater
Anynet+ Device
2, 3
Anynet+ Device 1
Setup
Using the Setup Menu
■ Slide Show Speed: Select to control the slide show speed. You can
select Fast, Normal or Slow.
■ Background Music: Select to determine whether to play an MP3 file
during a slide show. You can select Music On or Music Off.
■ Background Music Setting: While a slide show is in progress, use
the Background Music Setting to select a music file to listen to.
Select an MP3 file as the background music.
■ Repeat Music: Select to determine whether to repeat playing the
music when all MP3 files in the current folder have been played.
■ Screen Saver: Select to set the waiting time before the screen saver appears. The screensaver will appear when no
button is pressed for 10 min, 20 min, 40 min, 1 hour or Off.
■ Safe Remove: You can remove the device safely from the TV.
Playing the selected photos / music files
y Press the Yellow button.
y Repeat the above operation to select desired photos / music files.
✎
Selected photos or files are marked with the symbol
-
. To cancel a selection, press the Yellow button again.
y Press the
O
(Play) / ENTER
button to play the selected photos or files.
Setup
&=
==
=$=
To Next Page
Loading...
