Samsung PN43D450A2D - Page 69

◀ ▶
English
■
Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. Go to Network Settings screen. To enter it, follow the directions of Network
Settings.
2. Select the WPS(PBC).
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it
needs and connects to your network.
4. The network connection screen appears,
and network set up is done.
U
Move
E
Enter
R
Return
Network Settings
Selectanetworkconnectiontype.
Wired
Wireless(General)
WPS(PBC)
One Foot
Connection
Connect to the Access Point easily by pressing the
WPS(PBC) button. Choose this if your Access Point
supports Push Button Configuration(PBC)
● Thedisplayedimagemaydifferdependingonthe
model.