Samsung PN43D450A2D - Page 70

◀
◀
▶
English
■
Network Settings (One Foot Connection)
The One Foot Connection function lets you connect your Samsung TV
automatically to Samsung wireless Router. If your Wireless Router does not support
One Foot Connection, you must connect using one of the other methods.
N
You can check for equipment that supports One Foot Connection on www.
samsung.com.
How to set up using One Foot Connection
Turn on the power of AP and TV.
1. Go to Network Settings screen. To enter
it, follow the directions of Network
Settings.
2. Select the One Foot Connection.
U
Move
E
Enter
R
Return
Network Settings
Selectanetworkconnectiontype.
Wired
Wireless(General)
WPS(PBC)
One Foot
Connection
Connect to the wireless network automatically if your
access point supports One Foot Connection. Select
this connection type after placing the Access Point
within 10 inches (25cm) of your TV.
● Thedisplayedimagemaydifferdependingonthe
model.