To Next PageTo Next PageWhy is there no picture or sound on my Samsung PN58A650T1F Flat Panel TV?
If your Samsung Flat Panel TV shows no picture or sound, try the following: * Try another channel. * Press the SOURCE button. * Ensure the TV is plugged in. * Check the antenna connections. * Make sure the MUTE button is off.
What to do if my Samsung PN58A650T1F Flat Panel TV remote control malfunctions?
If the remote control for your Samsung Flat Panel TV isn’t working properly, try these steps: 1. Replace the remote control batteries. 2. Clean the upper edge of the remote control (transmission window). 3. Check the battery terminals. 4. Press the TV button to put your remote control in the TV mode. 5. Make sure the remote has batteries. 6. Check that the “+” and “-” ends of the batteries are inserted correctly.
Why is the picture quality poor on my Samsung PN58A650T1F?
If you are experiencing poor picture quality on your Samsung Flat Panel TV, try switching to another channel, adjusting the antenna, and checking all wire connections.
What to do if there is no sound or the sound is too low on my Samsung PN58A650T1F Flat Panel TV?
If you are experiencing low or no sound on your Samsung Flat Panel TV, check the volume of any units connected to your TV, such as a digital broadcasting receiver, DVD player, cable broadcasting receiver, or VCR. Then, adjust the TV volume accordingly.
What to do if the screen is black and the power indicator light blinks steadily on Samsung PN58A650T1F Flat Panel TV?
If your Samsung Flat Panel TV's screen is black and the power indicator light is blinking, it might be using its power management system. Here are some things to try: * If connected to a computer, check the Power and Signal Cable, move the computer’s mouse, or press any key on the keyboard. * If connected to other equipment (STB, DVD, etc), check the Power and Signal Cable. * Press the Source button on the panel or remote control. * Turn the TV off and on.
Why is the image too light or too dark on my Samsung Flat Panel TV?
If the image on your Samsung Flat Panel TV is too light or too dark, adjust the Brightness and Contrast. You can also try adjusting the Fine tuning.
Why does my Samsung Flat Panel TV operate erratically?
If your Samsung Flat Panel TV is operating erratically, unplug the TV for 30 seconds, then try operating it again.
What does it mean when the Samsung PN58A650T1F caption shows HD?
If your Samsung Flat Panel TV caption shows HD, it means the selected channel is a digital channel. However, if the broadcasting station converts an analog signal into digital, the visual quality may not be perfect.
How to fix digital broadcasting screen problem on Samsung PN58A650T1F?
To fix digital broadcasting screen problems on your Samsung Flat Panel TV, check the digital signal strength and input antenna.
Why does the picture roll vertically on my Samsung Flat Panel TV?
If the picture on your Samsung Flat Panel TV rolls vertically, check all connections.
General| Brand | Samsung |
|---|---|
| Model | PN58A650T1F |
| Category | Flat Panel TV |
| Language | English |
