Samsung PPM63M7FS - Page 18

Disassembly & Reassembly
Samsung Electronics 3-5
3-1-10 Separation of ASSY PDP MODULE P-X MAIN & BUFFER BOARD
Part Name Description Description Photo
Flat Cable
① Detach all Connectors from the X-Buffer
Board.
※ To separate the Flat Cable of the
X-Buffer Board, press the upper and the
lower sides of the connector.
X-Main
Board
① Remove 6 screws.
: PH,+,WWP,M3,L8,NI PLT,SWRCH18A,
② Remove the X-Main Board.
X-Buffer
Upper &
Lower
Board
① Remove 6 screws.
: PH,+,WWP,M3,L8,NI PLT,SWRCH18A,
② Remove the X-Buffer Upper & Lower
Board.