Troubleshooting
Samsung Electronics 4-13
4-2 Adjustment
4-2-1 ServiceInstruction
1. Check if the measurement and test equipment is working properly.
2. Secure sufficient work space for disassembling the product.
3. Prepare a soft pad for disassembling the product.
<If adjustment equipment is available>
①
②
Adjust Calibration of Factory Mode for each mode.
③
Adjust White Balance of Factory Mode.
<If adjustment equipment is not available>
①
Write down the value of HDMI White Balance of Factory Mode before replacing Board.
②
③
Set the value of HDMI White Balance with the value written down before.
To Next Page
Loading...
