Samsung PS43D450A2W - Connecting to a Common Interface Slot; Using the CI or CI+ CARD

◀ ▶
English
How to use Timer Viewing in Channel List (digital channels only)
When you set the Timer Viewing in Channel List, you can only set the programme in
Programme View.
1. Press the CH LIST button, then select a desired digital channel.
2. Press the
{
(Programme View) button.
3. Press the
u
/
d
buttons to select the desired programme, then press the
ENTER
E
Information button.
4. Select Timer Viewing, then press the ENTER
E
button when done.
N
If you want to cancel Timer Viewing, follow steps 1 through 3. Select Cancel
Schedules.