◀ ▶
English
Problem Possible Solution
The connected device is not
displayed.
•
Check whether or not the device supports Anynet+ functions.
•
Check whether or not the HDMI cable is properly connected.
•
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
•
Search Anynet+ devices again.
•
You can connect an Anynet+ device using the HDMI cable only.
Some HDMI cables may not support Anynet+ functions.
•
If connection is terminated because there has been a power
interruption or the HDMI cable has been disconnected, please
repeat the device scan.
The TV sound is not output
through the receiver.
•
Connect the optical cable between TV and the receiver.
To Next Page
Loading...
