◀ ▶
English
●
SatCR/Unicable Settings: Configure single cable installation.
N
This function may not support depending on the region.
–
SatCR/Unicable: Enables or disable single cable installation support.
–
Slot Number: Select the SatCR user slot number for this receiver.
–
Slot Frequency: Enter the appropriate frequency to receive the signal from
SatCR.
–
Detect Slot Frequency: Auto-detect the signal frequency for the selected
slot number.
–
Verify Slot Frequency: Verify that the frequency entered corresponds to the
selected slot.
To Next Page
Loading...
