◀ ▶
English
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set
up automatically” procedure.
2. Select the IP Settings on network test
screen.
3. Set IP Mode to Manual.
4. Press the
d
button on your remote to go to
the IP Address.
● The displayed image may differ depending on the
model.
U
Move
E
Enter
R
Return
IP Settings
Internet Protocol Setup : Manual
r
IP Address
.
.
.
Subnet Mask
.
.
.
Gateway
.
.
.
DNS : Manual
DNS Server
.
.
.
OK
To Next Page
Loading...
