Samsung PS43D450A2W User Manual (English)

Other manuals for Samsung PS43D450A2W

Service Manual111 pages

E-Manual223 pages

Questions and Answers:

C
Christian MonroeJul 26, 2025
Why is Anynet+ not working on my Samsung Plasma TV?
- S
  Scott BrownJul 26, 2025
  If Anynet+ is not working on your Samsung Plasma TV, first ensure that the connected device is Anynet+ compatible, as the system only supports these devices. Ensure that only one receiver is connected. Check the power cord and the Video/Audio/HDMI cable connections of the Anynet+ device. Verify that Anynet+ (HDMI-CEC) is enabled in the Anynet+ setup menu and that the TV remote is in TV mode and is Anynet+ compatible. Note that Anynet+ may not function during channel searches or initial setup. If you connect or disconnect the HDMI cable, rescan for devices or power cycle the TV. Finally, confirm that the Anynet+ function of the external device is enabled.
J
Johnny GarciaJul 30, 2025
What to do if the connected device is not displayed on Samsung Plasma TV?
- A
  Andrew FriedmanJul 30, 2025
  If your connected device isn't showing up on your Samsung Plasma TV, verify that it supports Anynet+ functions. Also, check that the HDMI cable is properly connected and that Anynet+ (HDMI-CEC) is enabled in the Anynet+ setup menu. Try rescanning for Anynet+ devices. Keep in mind that Anynet+ only works with HDMI connections, and some HDMI cables may not support Anynet+. If there was a power interruption or the HDMI cable was disconnected, repeat the device scan.
C
craiggonzalezAug 3, 2025
How to start Anynet+ on a Samsung PS43D450A2W Plasma TV?
- K
  Kyle HarrisAug 3, 2025
  To start Anynet+ on your Samsung Plasma TV, ensure the Anynet+ device is correctly connected to the TV and that Anynet+ (HDMI-CEC) is turned on in the Anynet+ Setup menu. Then, press the TOOLS button to bring up the Anynet+ menu and choose the option you want.
E
Emily McintyreAug 7, 2025
How to exit Anynet+ on a Samsung PS43D450A2W?
- M
  Mr. Joshua OlsonAug 7, 2025
  To exit Anynet+ on your Samsung Plasma TV, select 'View TV' in the Anynet+ menu. Alternatively, press the SOURCE button on your TV remote and choose a device that is not Anynet+ compatible.
C
Carl FisherAug 12, 2025
What to do if the message “Connecting to Anynet+ device...” appears on the screen of Samsung PS43D450A2W?
- R
  rharrisAug 12, 2025
  If you see the message “Connecting to Anynet+ device...” on your Samsung Plasma TV screen, you cannot use the remote control during the configuration process or while switching to a view mode. Wait until the Anynet+ setting or the switch to view mode is complete before using the remote control.
H
Holly HoweAug 16, 2025
Why Anynet+ device does not play on Samsung PS43D450A2W?
- C
  Christopher OchoaAug 16, 2025
  If the Anynet+ device is not playing on your Samsung Plasma TV, it might be because Plug & Play (initial setup) is currently in progress. The play function is unavailable during this time.
E
ehillAug 20, 2025
How to output TV sound through the receiver on Samsung PS43D450A2W Plasma TV?
- A
  Angela AcevedoAug 20, 2025
  To output the TV sound through the receiver on your Samsung Plasma TV, connect an optical cable between the TV and the receiver.

Samsung PS43D450A2W Specifications

General

3D	No
Depth	56 mm
Width	1011 mm
Height	622 mm
Weight	16000 g
HD type	Not supported
Comb filter	Digital
Pixel pitch	- mm
Audio system	Dolby Digital Plus, Dolby Pulse
RS-232 ports	0
Package depth	270 mm
Package width	1110 mm
Product color	Black
Package height	736 mm
Package weight	23500 g
Cables included	AC
Noise reduction	Yes
RMS rated power	20 W
AC input voltage	220 - 240 V
Display diagonal	43 \
AC input frequency	50 - 60 Hz
Depth (with stand)	251 mm
Display brightness	- cd/m²
Display resolution	1024 x 768 pixels
Display technology	Plasma
Number of speakers	2
Height (with stand)	697 mm
High frequency rate	600 Hz
Weight (with stand)	19000 g
USB 2.0 ports quantity	1
Contrast ratio (typical)	-
Display number of colors	262144 colors
Power consumption (standby)	0.1 W
Power consumption (typical)	230 W
Digital signal format system	DVB-C, DVB-T
Supported graphics resolutions	1024 x 768 (XGA)
Consumer Electronics Control (CEC)	Anynet+
Dynamic contrast ratio marketing name	Mega Contrast

Summary

User Instructions

Screen Image Retention

Avoid displaying static images for extended periods to prevent screen burn-in.

Heat on the Top of the Plasma TV

The TV's top may become hot due to heat dissipation; this is normal operation.

Cracking Noise

The product may emit a "cracking" noise due to thermal expansion and contraction.

Cell Defects

Minor pixel variations (bright/dark) are normal due to manufacturing technology.

Operating Temperature Limits

Do not operate the TV at temperatures below 41°F (5°C).

Permanent Panel Damage

Displaying static images for too long can cause permanent damage to the PDP panel.

4:3 Format Border Traces

Extended viewing of 4:3 content may leave visible border traces on the screen.

After-images on the Screen

Prolonged display of still images can result in temporary after-images.

Warranty

Damage from image retention or burn-in is not covered by the warranty.

Correct Disposal of Product

Follow WEEE guidelines for environmentally sound disposal of electronic equipment.

Correct Disposal of Batteries

Batteries must be separated and recycled according to local regulations.

Accessories

Ferrite Core (43 inches model)

Ferrite cores shield cables from interference for the 43-inch model.

Ferrite Core Specifications

Ferrite Core for Power Cord (51 inches)

Ferrite cores for power cords shield cables from interference.

Ferrite Core (51 inches)

Ferrite cores shield cables from interference for 51-inch models.

Viewing the Control Panel

Standby Mode

Unplugging the TV is recommended for extended periods of non-use to save power.

Securing the Installation Space

Installation with a Stand

Ensure proper ventilation clearance when installing the TV on a stand.

Installation with a Wall-mount

Ensure proper ventilation clearance when mounting the TV on a wall.

Viewing the Remote Control

Installing Batteries

Instructions for correctly inserting AAA batteries into the remote control.

Changing the Input Source

Edit Name

Customize names for connected external input sources for easier selection.

Information

View detailed information about the currently selected external device.

Connecting to an Antenna

Basic Settings

Automatic basic settings configuration upon initial TV power-on.

Plug & Play (Initial Setup)

Selecting a Language

Choose the on-screen display language for the initial setup.

Selecting Store or Home Use

Choose between retail (Store) or home (Home) use mode for settings.

Selecting a Country

Select the country for appropriate settings and regional content.

Setting the Clock Mode

Set the clock automatically by time zone or manually.

Selecting an Antenna

Select the antenna source to memorize for channel tuning.

Selecting a Channel

Select the channel source for memorization and auto-tuning.

Enjoy Your TV

Final step to complete the initial setup and start using the TV.

Connecting AV Devices

Using HDMI or HDMI to DVI Cable

Connect devices using HDMI or HDMI to DVI cables for video and audio.

Using Component, Audio/Video, or Scart Cable

Connect with Component, A/V, or Scart cables for optimal picture quality.

Connecting to a PC and Audio Device

Using Optical or Headphone Connection

Connect digital audio systems or headphones via optical or headphone jacks.

Connecting to a PC

Using HDMI, HDMI to DVI, or D-Sub Cable

Connect PCs using HDMI, HDMI to DVI, or D-Sub cables.

Display Modes

Details display modes and resolutions supported via PC input connections.

Connecting to a Common Interface Slot

Using the CI or CI+ CARD

Insert a CI or CI+ card to access paid channels and update channel lists.

How to View the e-Manual

Screen Display Navigation

Navigate the e-Manual screen display to access features and sub-menus.

Toggling Between e-Manual and Menus

Learn how to switch between the e-Manual and TV menus for context.

Viewing the Contents

Using Zoom Mode

Magnify parts of the e-Manual screen for detailed viewing.

Searching by Index Page

Use the index page to search for specific keywords within the e-Manual.

Installing the Wall Mount

Installing the Wall Mount Kit

Instructions for safely installing the TV wall mount kit.

VESA Mount Specifications

Details VESA mounting hole specifications and screw compatibility.

Troubleshooting

Common Issues and Solutions

Guide to resolving common problems encountered with the TV.

List of Features

Digital Interface and Networking

Features like built-in HD tuner for receiving broadcasts without a cable box.

Anynet+ (HDMI-CEC)

Control connected Samsung devices supporting Anynet+ with the TV remote.

My Downloads

Play media files (music, pictures, movies) from a USB device.

Securing the TV to the Wall

Preventing TV from Falling

Steps to secure the TV to the wall using a strong cable to prevent tipping.

Storage and Maintenance

Cleaning the TV

Instructions for safely cleaning the TV screen and body.

Specifications

Related product manuals

Samsung PS43D450A2WXZF

Samsung PS43F4500AWXZG

72 pages

Samsung PS43D450A2W User Manual

Table of Contents

Other manuals for Samsung PS43D450A2W

Questions and Answers:

Samsung PS43D450A2W Specifications

Summary

User Instructions

Screen Image Retention

Heat on the Top of the Plasma TV

Cracking Noise

Cell Defects

Operating Temperature Limits

Permanent Panel Damage

4:3 Format Border Traces

After-images on the Screen

Warranty

Correct Disposal of Product

Correct Disposal of Batteries

Accessories

Ferrite Core (43 inches model)

Ferrite Core Specifications

Ferrite Core for Power Cord (51 inches)

Ferrite Core (51 inches)

Viewing the Control Panel

Standby Mode

Securing the Installation Space

Installation with a Stand

Installation with a Wall-mount

Viewing the Remote Control

Installing Batteries

Changing the Input Source

Edit Name

Information

Connecting to an Antenna

Basic Settings

Plug & Play (Initial Setup)

Selecting a Language

Selecting Store or Home Use

Selecting a Country

Setting the Clock Mode

Selecting an Antenna

Selecting a Channel

Enjoy Your TV

Connecting AV Devices

Using HDMI or HDMI to DVI Cable

Using Component, Audio/Video, or Scart Cable

Connecting to a PC and Audio Device

Using Optical or Headphone Connection

Connecting to a PC

Using HDMI, HDMI to DVI, or D-Sub Cable

Display Modes

Connecting to a Common Interface Slot

Using the CI or CI+ CARD

How to View the e-Manual

Screen Display Navigation

Toggling Between e-Manual and Menus

Viewing the Contents

Using Zoom Mode

Searching by Index Page

Installing the Wall Mount

Installing the Wall Mount Kit

VESA Mount Specifications

Troubleshooting

Common Issues and Solutions

List of Features

Digital Interface and Networking

Anynet+ (HDMI-CEC)

My Downloads

Securing the TV to the Wall

Preventing TV from Falling

Storage and Maintenance

Cleaning the TV

Specifications

Related product manuals