English - 4
Using the TV's Controller (Panel Key)
TV Controller Remote control sensor
Function menu
Return
Down (Front)
Up (Rear)
Right
Left
✎
The position of controller, product colour and shape may vary depending on the model.
Power on Turns the TV on by pressing the controller in standby mode.
Adjusting the volume Adjusts the volume by moving the controller from side to side when the power is on.
Selecting a channel Selects a channel by moving the controller up and down when the power is on.
Using the function menu Press the controller when the power is on, then the function menu screen appears. If
you press it again, the function menu screen disappears.
Using the Menu (
m
) Selects the MENU(
m
) by moving the controller in the function menu screen. The
OSD(On Screen Display) of your TV’s feature appears.
Selecting the Source( ) Selects the Source( ) by moving the controller in the function menu screen. The
Source list screen appears.
Selecting the Content Home Selects the CONTENT( ) by moving the controller in the function menu screen.
The Content Home main screen appears.
Power Off (
P
) Selects the Power Off(
P
) to turn the TV off by moving the controller in the function
menu screen.
✎
Exits the menu when pressing the controller more than 1 second.
✎
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
[PE490-ASIA]BN68-03997A-ENG.indb 4 2012-03-27 �� 8:00:03
To Next Page
Loading...
