EasyManuals Logo

Samsung QB49R Quick Setup Guide

Samsung QB49R
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Issues Solutions
The screen keeps switching on and off. Check that the cable between the product and the PC is connected correctly.
No Signal is displayed on the screen.
Check that the product is connected correctly with a cable.
Check that the source device connected to the product is powered on.
Depending on the type of external device, the screen may not display
properly. In this case, connect it with the HDMI Hot Plug function turned On.
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the
product’s maximum resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution
and frequency according to the product specifications.
1 Remote sensor
Press a button on the remote control pointing at the sensor on the front of the product to perform the
corresponding function.
* Using other display devices in the same space as the remote control of this product can cause the other display
devices to be inadvertently controlled.
2 Power indicator
3 Power button
Turns the product on or off.
Parts
Troubleshooting Guide
3
2
1
Speaker

Other manuals for Samsung QB49R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Samsung QB49R and is the answer not in the manual?

Samsung QB49R Specifications

General IconGeneral
Color gamut92 %
Pixel pitch0.093 x 0.279 mm
Response time8 ms
Display diagonal49 \
Display brightness350 cd/m²
Display technologyLED
Vertical scan range48 - 75 Hz
Horizontal scan range30 - 81 kHz
LED backlighting typeEdge-LED BLU
Display number of colors16.78 million colors
Active display area (W x H)1073.78 x 604 mm
Dynamic contrast ratio marketing nameMega Contrast
Package depth152 mm
Package width1247 mm
Package height772 mm
Package weight18000 g
Ethernet LANYes
VGA (D-Sub) input ports0
Ethernet LAN (RJ-45) ports1
AC input voltage100 - 240 V
Heat dissipation470.5 BTU/h
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (sleep)0.5 W
Power consumption (standby)- W
Power consumption (typical)103 W
Cables includedAC
L2 cache2048 KB
User memory4.12 GB
Memory clock speed1500 MHz
PurposeUniversal
Operating hours (hours/days)-
Internal memory2.5 GB
Processor cores4
Processor modelA72
Processor familyARM Cortex
Processor frequency1.7 GHz
Audio formats supportedAC3
Image formats supportedJPEG, PNG
Video formats supportedAVC, AVS, H.263, H.264, HEVC, MPEG1, MPEG2, MPEG4, VC-1, VP8, VP9
Internal storage capacity8 GB
Operating system installedTizen 4.0
Certification60950-1, EMC B
Product colorBlack
Product designDigital signage flat panel
Bezel width (side)9.2 mm
Placement supportedIndoor
Bezel width (bottom)11.2 mm
Panel mounting interface200 x 200 mm
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 80 %
Sustainability certificatesENERGY STAR
RMS rated power20 W
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Depth46.3 mm
Width1099.2 mm
Height631.5 mm
Weight13500 g

Related product manuals