EasyManua.ls Logo

Samsung QBT-B Series - User Manual

Samsung QBT-B Series
105 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
Series: QBT QET QMT QBT-B QMT-B
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QET models is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.

Table of Contents

Questions and Answers

  • K
    Kenneth SmithAug 11, 2025
    How to fix Anynet+ when it's not working on my Samsung QBT-B TV?
    • S
      Sara MyersAug 11, 2025
      If Anynet+ is not working on your Samsung TV, verify that the connected device is an Anynet+ compatible device and that its power cord is properly connected. Check the video, audio, and HDMI cable connections. Also, ensure that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, ensure the Anynet+ function on the external device is enabled.
  • J
    John ShortAug 21, 2025
    Why is my connected device not displayed on my Samsung TV?
    • S
      Sharon WilliamsAug 22, 2025
      If your connected device isn't showing up, first verify that it supports Anynet+ functions and is properly connected via an HDMI cable. Ensure that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Keep in mind that some HDMI cables might not fully support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
  • M
    Melissa BrownAug 31, 2025
    What to do to exit Anynet+ on Samsung TV?
    • A
      alex49Aug 31, 2025
      To exit Anynet+ on your Samsung TV, press the SOURCE button on the TV's remote control and choose a device that is not Anynet+ compatible.

Samsung QBT-B Series Specifications

General IconGeneral
USB2
Smart TVYes
Screen Size50, 55, 65, 75, 85 inches
Resolution3840 x 2160 (4K UHD)
Response Time8ms
Operating SystemTizen
Wi-FiYes
BluetoothYes
HDRHDR10+
Voice AssistantsBixby
Dimensions (Without Stand)Varies by model
Weight (Without Stand)Varies by model

Related product manuals