Why does my Samsung TV show 'Disconnecting Anynet+ device...'
When the message 'Disconnecting Anynet+ device...' appears on your Samsung TV screen, it means you cannot use the remote control while Anynet+ is configuring or switching view modes. Please wait until the configuration or switching process is complete before using the remote control.
Why is my connected device not displayed on my Samsung QB55B?
If your connected device isn't showing up, first verify that it supports Anynet+ functions and is properly connected via an HDMI cable. Ensure that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Keep in mind that some HDMI cables might not fully support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
How to fix Anynet+ when it's not working on my Samsung TV?
If Anynet+ is not working on your Samsung TV, verify that the connected device is an Anynet+ compatible device and that its power cord is properly connected. Check the video, audio, and HDMI cable connections. Also, ensure that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, ensure the Anynet+ function on the external device is enabled.
What to do to exit Anynet+ on Samsung TV?
To exit Anynet+ on your Samsung TV, press the SOURCE button on the TV's remote control and choose a device that is not Anynet+ compatible.
Essential safety instructions for personal safety and property protection.
Guidelines for safe electrical connection and handling of the product.
Procedures and precautions for product installation.
Instructions on how to operate the product safely and effectively.
Hexadecimal codes for controlling product functions remotely.
Overview of the Multiple Display Control application.
Step-by-step guide for installing and uninstalling the MDC software.
Activating and organizing the video wall feature.
Configuring the display matrix for video wall layouts.
Setting the product to turn on automatically at a scheduled time.
Setting the product to turn off automatically at a scheduled time.
Adjusts display quality like brightness, color, contrast, and sharpness.
Configures onscreen menus, screen protection, and screen savers.
Manages sound modes, equalizer, audio output, and volume.
Manages wired and wireless network connections.
Steps to test the product and check resolution before contacting support.
Addresses problems like screen switching on/off or blank spaces.
Solves problems like power off, no signal, or non-optimum mode.
Solutions for distorted, blurry, unstable, or incorrectly colored screens.
Troubleshooting steps for no sound or low volume from built-in speakers.
Steps to troubleshoot a non-functional remote control.
General| Haze rate | 2 % |
|---|---|
| Pixel pitch | 0.315 x 0.315 mm |
| Response time | 8 ms |
| RGB color space | DCI-P3 |
| Color saturation | 92 % |
| Display diagonal | 55 \ |
| Display brightness | 350 cd/m² |
| Display technology | VA |
| Number of displays | 1 |
| Vertical scan range | 48 - 75 Hz |
| Horizontal scan range | 30 - 81 kHz |
| Contrast ratio (typical) | 4000:1 |
| Display number of colors | 1 billion colors |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (sleep) | 0.5 W |
| Power consumption (typical) | 143 W |
| Internal memory | 8 GB |
| Computer system type | System on Chip (SoC) |
| Operating system installed | Tizen 6.5 |
| USB ports quantity | 2 |
| HDMI ports quantity | 3 |
| DVI-I ports quantity | 0 |
| Package depth | 163 mm |
| Package width | 1402 mm |
| Package height | 858 mm |
| Package weight | 23600 g |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
| Orientation | Horizontal/Vertical |
| Mounting type | Wall |
| Product color | Black |
| Product design | Digital signage flat panel |
| Placement supported | Indoor |
| Panel mounting interface | 200 x 200 mm |
| Purpose | Universal |
| HDCP version | 2.2 |
| Operating hours (hours/days) | 16/7 |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth | 46.3 mm |
|---|---|
| Display width | 1235.1 mm |
| Display height | 707.9 mm |
| Display weight | 18100 g |
To Next Page
