To Next PageTo Next PageWhy does my Samsung QB50B show 'Disconnecting Anynet+ device...'
When the message 'Disconnecting Anynet+ device...' appears on your Samsung TV screen, it means you cannot use the remote control while Anynet+ is configuring or switching view modes. Please wait until the configuration or switching process is complete before using the remote control.
Why is my connected device not displayed on my Samsung TV?
If your connected device isn't showing up, first verify that it supports Anynet+ functions and is properly connected via an HDMI cable. Ensure that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Keep in mind that some HDMI cables might not fully support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
How to fix Anynet+ when it's not working on my Samsung QB50B?
If Anynet+ is not working on your Samsung TV, verify that the connected device is an Anynet+ compatible device and that its power cord is properly connected. Check the video, audio, and HDMI cable connections. Also, ensure that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, ensure the Anynet+ function on the external device is enabled.
What to do to exit Anynet+ on Samsung QB50B?
To exit Anynet+ on your Samsung TV, press the SOURCE button on the TV's remote control and choose a device that is not Anynet+ compatible.
General| Haze rate | 2 % |
|---|---|
| Pixel pitch | 0.285 x 0.285 mm |
| Response time | 8 ms |
| RGB color space | DCI-P3 |
| Color saturation | 92 % |
| Display diagonal | 50 \ |
| Display brightness | 350 cd/m² |
| Display technology | VA |
| Number of displays | 1 |
| Vertical scan range | 48 - 75 Hz |
| Horizontal scan range | 30 - 81 kHz |
| Contrast ratio (typical) | 4000:1 |
| Display number of colors | 1 billion colors |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (sleep) | 0.5 W |
| Power consumption (typical) | 143 W |
| Internal memory | 8 GB |
| Computer system type | System on Chip (SoC) |
| Operating system installed | Tizen 6.5 |
| USB ports quantity | 2 |
| HDMI ports quantity | 3 |
| DVI-I ports quantity | 0 |
| Package depth | 152 mm |
| Package width | 1269 mm |
| Package height | 784 mm |
| Package weight | 17600 g |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
| Orientation | Horizontal/Vertical |
| Mounting type | Wall |
| Product color | Black |
| Product design | Digital signage flat panel |
| Placement supported | Indoor |
| Panel mounting interface | 200 x 200 mm |
| Purpose | Universal |
| HDCP version | 2.2 |
| Operating hours (hours/days) | 16/7 |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth | 46.3 mm |
|---|---|
| Display width | 1121.4 mm |
| Display height | 643.9 mm |
| Display weight | 13400 g |
Guidelines for personal safety and property damage prevention during product use.
Precautions for safe electrical handling and connection to prevent shocks or fires.
Warnings and precautions regarding product installation, ventilation, and cable management.
Guidance on securing the product, avoiding certain locations, and professional installation.
Safety guidelines for operating the product, including handling noise, smell, and external impacts.
Precautions for handling power, disassembling, and using the product during electrical storms.
Guidelines for preventing screen damage, proper handling, and avoiding direct sunlight.
Explains the hexadecimal structure of commands for controlling the device, including checksum calculation.
Commands for setting power state (on/off) and adjusting volume levels.
Commands to view and set the input source, with a list of source codes.
Commands for adjusting screen size and activating Video Wall mode.
Commands to enable/disable safety lock and control Video Wall ON/OFF status.
Commands for turning Video Wall function on/off and assigning user control.
Step-by-step guide for installing and uninstalling the MDC software for device control.
How to activate Video Wall and configure horizontal/vertical splits.
Rearranging split screens in a video wall and selecting display formats (Full, Natural).
Configuring the product to turn on automatically at a set time and date.
Scheduling the product to turn off automatically at a specific time.
Adjusting backlight, brightness, contrast, sharpness, and color temperature for optimal picture quality.
Fine-tuning white balance, gamma, contrast, black levels, flesh tone, and color space.
Managing input signal, motion lighting, color tone, and HDMI black level.
Adjusting picture size, aspect ratio, zoom, position, and resetting picture settings.
Selecting sound modes, adjusting balance, equalizer, digital audio format, and Dolby Atmos.
Configuring sound output to internal or external speakers and auto volume adjustments.
Managing automatic source switching, power on, power saving, standby, and remote configuration.
Adjusting brightness, screen lamp schedule, power-off options for no signal or inactivity.
Configuring safety lock, button lock, screen monitoring, USB auto play, and mobile connection security.
Managing remote access, securing protocols, SNMP, network/USB locks, and certificates.
Enabling and using Anynet+ for controlling connected Samsung devices via the remote.
Solutions for common Anynet+ problems like non-operation, starting/exiting, and device display.
