81
2nd 3rd Description
Touch Control Set the functions related to touch control.
"
This function may not be supported depending on the model.
Touch Control Prevent touch gestures from controlling your device.
Admin Menu Lock Set the Admin Menu Lock to display the administrator settings menu when you tap and hold the finger on the screen.
"
Available only when Touch Control is set to On.
Device to Control Specify a source to control by touch input. If you are playing touchable content created in the author programme, select
Connected Source Device. In this case, you will need to use the remote to control the device menu.
"
This function may not be supported depending on the model.
Time You can configure Clock Set or DST. Configure various time-related settings.
Clock Set Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons to
move from one entry field to the next. Press E when done.
"
You can set the Date and Time directly by pressing the number buttons on the remote control.
NTP Settings Set up the server URL and time zone to use the network time.
DST Switches the DST (Daylight Saving Time) function on or off.
"
Start Date, End Date and Time Offset are enabled only when DST is set to On.
Power On Delay When connecting multiple products, adjust the power-on time for each product to prevent power overload (within the range
0–50 seconds).
To Next Page
Loading...
Need help?
General
