83
2nd 3rd Description
Eco Solution Brightness Limit Turn the Brightness Limit on or off. If you select On, the display won't have the maximum brightness, but you will save energy.
"
This function may not be supported depending on the model.
Energy Saving Mode Reduce the power consumption by adjusting the screen brightness.
Eco Sensor Automatically adjust the picture brightness based on the ambient light level.
"
If the screen contrast is not sufficient, set the Eco Sensor to Off. If the Eco Sensor is Off, it may not comply with energy
standards.
"
This function may not be supported depending on the model.
Minimum Backlight
Set the minimum brightness for the signage screen. This function only works if its value is lower than the value set in the
Picture menu's Backlight setting.
"
If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the
surrounding light intensity.
"
Available only when Eco Sensor is set to On.
"
This function may not be supported depending on the model.
Screen Lamp Schedule
Screen Lamp Schedule
Enable or disable the lamp schedule.
Schedule 1, Schedule 2
– Time
The panel brightness will change to the brightness set in Lamp at a specified time.
– Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
No Signal Power Off Save power by turning the product off when no signal is received from any source.
"
This function may not be supported depending on the model.
"
This function does not operate if the display is in the standby mode.
"
The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off Choose how long the display will wait before turning off after no user interaction is detected.