EasyManua.ls Logo

Samsung QM55B - User Manual

Samsung QM55B
107 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
QM43B QM50B QM55B QM65B QM75B QM65B-N QM43B-T QM55B-T
The color and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.

Table of Contents

Questions and Answers

  • S
    Sarah FinleyAug 14, 2025
    Why does Anynet+ not work on my Samsung TV?
    • A
      Andrew ThomasAug 15, 2025
      If Anynet+ isn't functioning on your Samsung TV, there are several things to check: * First, verify that the connected device is actually an Anynet+ compatible device, as the system only supports these. * Ensure the power cord of the Anynet+ device is securely connected. * Check all Video, Audio, and HDMI cable connections to the Anynet+ device. * Confirm that Anynet+ (HDMI-CEC) is enabled in your Samsung TV's System menu. * Verify that the remote control you're using is Anynet+ compatible. * Be aware that Anynet+ may not operate during the initial setup phase. * If you've reconnected the HDMI cable, perform a device search again or power cycle your TV. * Finally, ensure the Anynet+ function is enabled on the Anynet+ device itself.
  • T
    Timothy MercerAug 18, 2025
    Why is my connected device not displayed on my Samsung QM55B?
    • B
      Brandy RamirezAug 18, 2025
      If your connected device isn't showing up, first verify that it supports Anynet+ functions and is properly connected via an HDMI cable. Ensure that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Keep in mind that some HDMI cables might not fully support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
  • W
    waynesmithAug 21, 2025
    How to fix Anynet+ when it's not working on my Samsung QM55B TV?
    • M
      Michael GriffithAug 21, 2025
      If Anynet+ is not working on your Samsung TV, verify that the connected device is an Anynet+ compatible device and that its power cord is properly connected. Check the video, audio, and HDMI cable connections. Also, ensure that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, ensure the Anynet+ function on the external device is enabled.
  • A
    angel59Aug 25, 2025
    How do I start Anynet+ on my Samsung TV?
    • J
      James RussellAug 25, 2025
      To start Anynet+ on your Samsung TV, check that the Anynet+ device is correctly connected to the TV. Also, make sure that Anynet+ (HDMI-CEC) is turned on in the System menu.
  • A
    Ashley HenryAug 28, 2025
    What to do to exit Anynet+ on Samsung QM55B?
    • P
      Patricia BuchananAug 28, 2025
      To exit Anynet+ on your Samsung TV, press the SOURCE button on the TV's remote control and choose a device that is not Anynet+ compatible.
  • C
    Christian RichardsonAug 31, 2025
    Why does my Samsung TV show 'Disconnecting Anynet+ device...'
    • S
      Steven AllenAug 31, 2025
      When the message 'Disconnecting Anynet+ device...' appears on your Samsung TV screen, it means you cannot use the remote control while Anynet+ is configuring or switching view modes. Please wait until the configuration or switching process is complete before using the remote control.
  • D
    Daniel MartinezSep 3, 2025
    What to do if connected device is not displayed on Samsung QM55B?
    • I
      Isaiah PhamSep 3, 2025
      If a connected device isn't showing up on your Samsung TV, here's what to check: 1. Confirm that the device supports Anynet+ functions. 2. Ensure the HDMI cable is properly connected. 3. Verify that Anynet+ (HDMI-CEC) is turned on in the System menu. 4. Try rescanning for Anynet+ devices. 5. Make sure the device is connected via HDMI, as Anynet+ requires this connection. 6. Be aware that some HDMI cables might not support Anynet+. 7. If there was a power interruption or the HDMI cable was disconnected, repeat the device scan.
  • D
    Dustin DennisSep 6, 2025
    What to do if Samsung QM55B shows 'Disconnecting Anynet+ device' message?
    • J
      joanne07Sep 6, 2025
      If you see the message “Disconnecting Anynet+ device ...” on your Samsung TV, it means you can't use the remote control during Anynet+ configuration or when switching to a view mode. Please wait until the configuration or switching process is complete before using the remote control.
  • K
    kendra38Sep 10, 2025
    How to exit Anynet+ on a Samsung TV?
    • K
      kenneth01Sep 12, 2025
      To exit Anynet+ on your Samsung TV, press the SOURCE button on the remote control and select a device that is not Anynet+ compatible.

Summary

Before Using the Product

Safety Precautions

Safety instructions for personal and property protection.

Electricity and Safety

Guidelines for safe electrical connections and usage.

Installation

Procedures and safety guidelines for installing the product.

Operation

Instructions and safety precautions for operating the product.

Using a Touchscreen Monitor

Configuring Touchscreen Monitor Settings

Steps for calibrating touchscreen monitor settings.

Connecting and Using a Source Device

Connecting to a PC

Methods for connecting a PC via HDMI, HDMI-DVI, and DP.

Multiple Display Control

Control Codes

Commands and data for serial control.

Menu

Picture

Settings for adjusting picture quality.

Sound

Settings for audio output and sound modes.

Network

Settings for network status and connections.

Network Settings (Wired)

Connecting to a Wired Network

Methods for connecting the product to a LAN using a cable.

Automatic Open Network Settings (Wired)

Manual Open Network Settings (Wired)

Network Settings (Wireless)

Connecting to a Wireless Network

Automatic Network Setup (Wireless)

Manual Network Setup (Wireless)

Use WPS

System

Samsung QM55B Specifications

General IconGeneral
HD type3.5K Ultra HD
Haze rate25 %
Pixel pitch0.285 x 0.285 mm
Response time8 ms
RGB color spaceDCI-P3
Color saturation92 %
Display diagonal55 \
Display brightness500 cd/m²
Display technologyVA
Number of displays1
Vertical scan range48 - 75 Hz
Horizontal scan range30 - 81 kHz
Contrast ratio (typical)4000:1
Display number of colors1 billion colors
USB portYes
HDMI ports quantity3
DVI-I ports quantity0
RMS rated power10 W
Number of built-in speakers2
OrientationHorizontal/Vertical
Mounting typeWall
Product colorBlack
Product designDigital signage flat panel
Placement supportedIndoor
Panel mounting interface200 x 200 mm
PurposeUniversal
HDCP version2.2
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 80 %
Package depth163 mm
Package width1402 mm
Package height858 mm
Package weight23600 g
Internal memory16 GB
Computer system typeSystem on Chip (SoC)
Operating system installedTizen 6.5
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA+ to G
Power consumption (sleep)0.5 W
Power consumption (typical)143 W
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Depth46.3 mm
Width1235.1 mm
Height707.9 mm
Weight18100 g

Related product manuals