EasyManua.ls Logo

Samsung QMT Series - User Manual

Samsung QMT Series
105 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
Series: QBT QET QMT QBT-B QMT-B
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QET models is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
You will be informed of the administration fee amount before a technician visits.

Table of Contents

Questions and Answers

  • R
    Ronald AdamsAug 13, 2025
    How to fix Anynet+ when it's not working on my Samsung QMT?
    • M
      Ms. Natasha SanfordAug 13, 2025
      If Anynet+ is not working on your Samsung TV, verify that the connected device is an Anynet+ compatible device and that its power cord is properly connected. Check the video, audio, and HDMI cable connections. Also, ensure that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ may not function during the initial setup. If you reconnected the HDMI cable, rescan for devices or power cycle your TV. Finally, ensure the Anynet+ function on the external device is enabled.
  • J
    Joyce PayneAug 17, 2025
    Why is my connected device not displayed on my Samsung QMT?
    • R
      rebekahrussellAug 17, 2025
      If your connected device isn't showing up, first verify that it supports Anynet+ functions and is properly connected via an HDMI cable. Ensure that Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Keep in mind that some HDMI cables might not fully support Anynet+. If there was a power outage or the HDMI cable was disconnected, rescan the devices.
  • A
    Andres HarrisonAug 20, 2025
    What to do to exit Anynet+ on Samsung QMT?
    • S
      Susan JonesAug 21, 2025
      To exit Anynet+ on your Samsung TV, press the SOURCE button on the TV's remote control and choose a device that is not Anynet+ compatible.
  • K
    Kyle PetersAug 25, 2025
    Why is Anynet+ not working on my Samsung TV?
    • B
      Brian BrownAug 26, 2025
      Anynet+ may not function correctly for several reasons. Ensure the device is Anynet+ compatible, the power cord is properly connected, and the Video/Audio/HDMI cables are correctly connected. Also, verify that Anynet+ (HDMI-CEC) is enabled in the System menu and that the remote control is Anynet+ compatible. Note that Anynet+ might not work during the initial setup.
  • J
    james36Aug 28, 2025
    What to do if the connected device is not displayed on my Samsung TV using Anynet+?
    • R
      Ronald HernandezAug 28, 2025
      If a connected device isn't showing up, first confirm that the device supports Anynet+ functions and that the HDMI cable is properly connected. Check if Anynet+ (HDMI-CEC) is enabled in the System menu. Try rescanning for Anynet+ devices. Ensure you're using an HDMI connection, as Anynet+ requires it. Note that some HDMI cables may not fully support Anynet+ features. If a power failure or disconnection occurred, repeat the device scan.
  • I
    ichristianAug 31, 2025
    How to start Anynet+ on a Samsung QMT TV?
    • K
      Katherine BrownSep 1, 2025
      To start Anynet+, ensure the Anynet+ device is correctly connected to your Samsung TV and verify that Anynet+ (HDMI-CEC) is turned On in the System menu.
  • T
    Tina DuncanSep 4, 2025
    What to do if the message 'Disconnecting Anynet+ device...' appears on the Samsung QMT screen?
    • D
      Dominique Elliott PhDSep 4, 2025
      This message appears because you cannot use the remote control while Anynet+ is configuring or switching view modes. Please wait until the product has completed the Anynet+ configuration or has finished switching to Anynet+ before using the remote control.
  • J
    Jack HintonSep 8, 2025
    How to exit Anynet+ on a Samsung TV?
    • S
      Sean KingSep 8, 2025
      To exit Anynet+, press the SOURCE button on your Samsung TV remote control and then select a device that is not Anynet+ compatible.

Samsung QMT Series Specifications

General IconGeneral
BrandSamsung
ModelQMT Series
CategoryTV
LanguageEnglish

Related product manuals