Samsung QM85C SHC - User Manual

Questions and Answers

L
longsusanAug 10, 2025
Why is Anynet+ not working on my Samsung Monitor?
- L
  laurasalazarAug 11, 2025
  Anynet+ may not work on your Samsung Monitor due to several reasons. First, ensure the device is an Anynet+ compatible device, as the system only supports these. Check that the Anynet+ device's power cord, Video/Audio/HDMI cable connections are properly connected. Also, verify that Anynet+ (HDMI-CEC) is set to 'On' in the System menu and that the remote control is Anynet+ compatible. Anynet+ may not function during initial setup. If you've reconnected the HDMI cable, search for devices again or power cycle your product. Finally, confirm that the Anynet+ function of the Anynet device is enabled.
A
amy50Aug 18, 2025
Why is the connected device not displayed on my Samsung Monitor?
- C
  courtney17Aug 18, 2025
  If the connected device isn't showing up on your Samsung Monitor, there are a few things to check: * First, ensure that the device supports Anynet+ functions. * Verify the HDMI cable is properly connected. * Confirm that Anynet+ (HDMI-CEC) is enabled in the System menu. It may also be necessary to search for Anynet+ devices again. Anynet+ requires an HDMI connection, and some HDMI cables might not fully support Anynet+ functions. If there was a power failure or the HDMI cable was disconnected, repeat the device scan.
G
Gabriel SmithAug 26, 2025
What to do if the message 'Disconnecting Anynet+ device...' appears on the screen of my Samsung QM85C SHC?
- J
  Julia PerryAug 26, 2025
  If the message 'Disconnecting Anynet+ device ...' appears on your Samsung Monitor, it means you can't use the remote control while configuring Anynet+ or switching to a view mode. Wait until the product completes the Anynet+ configuration or finishes switching to Anynet+ before using the remote control.
M
Michael MoralesSep 2, 2025
How to exit Anynet+ on a Samsung QM85C SHC?
- J
  John PayneSep 2, 2025
  To exit Anynet+ on your Samsung Monitor, press the s button on the product remote control and select a non- Anynet+ device.

Summary

Before Using the Product

Safety Precautions

Ensure personal safety and prevent property damage.

Electricity and Safety

Provides guidelines for safe electrical usage.

Installation

Instructions for correctly installing the product.

Operation

How to use and operate the product safely.

Precautions when handling the panel

Specific handling advice for the product's panel.

Preparations

Ports

Details the various input and output ports on the product.

Control menu

Explains how to access and use the product's control menu.

Administrator menu (Supported model: QB24 C-T)

Using a touchscreen monitor (Supported model: QB24 C-T)

Touchscreen monitor

Basic operation and precautions for touchscreen use.

Requirements

Connecting the touchscreen monitor

Steps to connect the monitor to a PC or laptop.

Configuring the touchscreen monitor settings

How to calibrate and configure touch settings.

Controlling the screen

Connecting and Using a Source Device

Before Connecting

Connecting to a PC

Methods for connecting a PC via HDMI or HDMI-DVI.

Connecting to a Video Device

Troubleshooting Guide

Testing the Product

Screen issue

Sound issue (For models with built-in speakers)

Remote control issue

Samsung QM85C SHC Specifications

General

Screen Size	85 inches
Contrast Ratio	5000:1
Response Time	8 ms
Display Type	LED
Refresh Rate	60 Hz
Viewing Angle	178°/178°
HDR	No
Connectivity	Wi-Fi, Bluetooth
Operating System	Tizen
Color Support	1.07 billion
Ports	HDMI, USB, DVI
Speakers	10W x 2
VESA Mount	600 x 400 mm
Weight	52.3 kg
Resolution	3840 x 2160