EasyManua.ls Logo

Samsung QMC - User Manual

Samsung QMC
128 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
© Samsung
Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners.
QBC (QB24C QB43C QB50C QB55C QB65C QB75C QB85C)
QBC-N (QB55C-N QB65C-N QB75C-N QB85C-N)
QBC-T (QB24C-T)
QHC (QH43C QH50C QH55C QH65C QH75C)
QMC (QM32C QM43C QM50C QM55C QM65C QM75C QM85C)
SHC (SH37C)
The color and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QBC, QBC-N, QBC-T, QM32C models is less than 16
hours.
If the product is used for longer than 16 hours a day, the warranty may be void.

Table of Contents

Questions and Answers

  • O
    owensjudyAug 10, 2025
    Why is Anynet+ not working on my Samsung Monitor?
    • M
      Michael MasseyAug 10, 2025
      Anynet+ may not work on your Samsung Monitor due to several reasons. First, ensure the device is an Anynet+ compatible device, as the system only supports these. Check that the Anynet+ device's power cord, Video/Audio/HDMI cable connections are properly connected. Also, verify that Anynet+ (HDMI-CEC) is set to 'On' in the System menu and that the remote control is Anynet+ compatible. Anynet+ may not function during initial setup. If you've reconnected the HDMI cable, search for devices again or power cycle your product. Finally, confirm that the Anynet+ function of the Anynet device is enabled.
  • C
    charlessilvaAug 18, 2025
    Why is the connected device not displayed on my Samsung QMC Monitor?
    • K
      kristabellAug 18, 2025
      If the connected device isn't showing up on your Samsung Monitor, there are a few things to check: * First, ensure that the device supports Anynet+ functions. * Verify the HDMI cable is properly connected. * Confirm that Anynet+ (HDMI-CEC) is enabled in the System menu. It may also be necessary to search for Anynet+ devices again. Anynet+ requires an HDMI connection, and some HDMI cables might not fully support Anynet+ functions. If there was a power failure or the HDMI cable was disconnected, repeat the device scan.
  • J
    Julia BurnsAug 26, 2025
    What to do if the message 'Disconnecting Anynet+ device...' appears on the screen of my Samsung QMC?
    • B
      Brian LopezAug 26, 2025
      If the message 'Disconnecting Anynet+ device ...' appears on your Samsung Monitor, it means you can't use the remote control while configuring Anynet+ or switching to a view mode. Wait until the product completes the Anynet+ configuration or finishes switching to Anynet+ before using the remote control.
  • M
    Megan MurraySep 2, 2025
    How to exit Anynet+ on a Samsung QMC Monitor?
    • R
      Rachel GuerraSep 2, 2025
      To exit Anynet+ on your Samsung Monitor, press the s button on the product remote control and select a non- Anynet+ device.

Summary

Before Using the Product

Safety Precautions

Essential safety guidelines to prevent personal injury and property damage.

Electricity and Safety

Instructions for safe electrical connections and handling of power cords.

Installation

Procedures and warnings related to installing the product safely.

Operation

Preparations

Checking the Components

Ports

Using a touchscreen monitor (Supported model: QB24 C-T)

Touchscreen monitor

Overview of the touchscreen functionality and its operation.

Calibration

Steps to calibrate the touchscreen for accurate input.

Connecting and Using a Source Device

Connecting to a PC

Connection Using an HDMI Cable

Home Screen

MagicInfo

Settings

Menu

Picture

Options for adjusting and optimizing the display's picture quality.

Sound

Troubleshooting Guide

Testing the Product

Steps to verify product operation before contacting support.

Check the followings.

Samsung QMC Specifications

General IconGeneral
BrandSamsung
ModelQMC
CategoryMonitor
LanguageEnglish

Related product manuals