- 106 -
System and Support
You can configure system and support settings such as clock, timers, energy usage and software updates.
Using the Time Functions and the Timers
Set the current time and use the timer function.
Settings General System Manager Time Try Now
You can set the current date and time using your remote control.
You must set the clock in the following cases:
● The power cable is disconnected and then connected.
● The TV is not connected to the Internet.
● No broadcast signals are received.
Using the sleep timer
Settings General System Manager Time Sleep Timer
You can use this function to automatically shut off the TV after a pre-set period of time. You can set the sleep timer
to up to 180 minutes to automatically turn off the TV.
" This function may not be supported depending on the model or geographical area.
" This function may not be supported in some viewing modes.
Turning off the TV using the off timer
Settings General System Manager Time Off Timer
You can set Off Timer to shut off the TV automatically at a specific time. Off Timer is only available if the Clock Set
has been set.
" To use this function, first set the Clock Set ( Settings General System Manager Time Clock Set).
" This function may not be supported in some viewing modes.
To Next Page
Loading...
