- 94 -
TV-Viewing Support Functions
Use the functions that are supported by digital or analogue channels.
Changing the broadcast signal
Live TV Channel List
Press the right directional button on your remote control, move the focus to Terrestrial, Cable, or Satellite, and then
press the Select button.
" You do not need to use this function if your TV is connected to a cable box or satellite box.
" The Channel List categories may vary depending on the incoming broadcast signals.
Scanning for available channels
Settings Broadcasting (Auto Tuning Settings) Auto Tuning
" This function may not be supported depending on the model or geographical area.
" If the TV is connected to a cable box or satellite box, you do not need to do this.
" The DVB-T2 system may not be supported depending on the geographical area.
" The Auto Tuning Settings may not appear depending on the model or geographical area.
Restricting Viewing to Specific Channels
Settings Broadcasting Apply Channel Lock Try Now
By selecting the menu, you can turn on or off the Apply Channel Lock function.
Lock specific channels to prevent children from watching adult content.
" To use this function, the PIN number is required.
Selecting the broadcasting audio option
Settings Broadcasting Dual Sound Try Now
Set audio options for stereo or bilingual broadcasts. For more information, refer to "Supported broadcasting audio
options".
" This function may not be supported depending on the model or geographical area.
To Next Page
Loading...
