- 45 -
" Anynet+ (HDMI-CEC) works only with external devices that support HDMI-CEC and only when those devices are either in
standby mode or turned on.
" Anynet+ (HDMI-CEC) can control up to 12 compliant external devices (up to 3 of the same type) except for home theatres.
Anynet+ (HDMI-CEC) can control only one home theatre system.
" To listen to 5.1 channel audio from an external device, connect the device to the TV via an HDMI cable and connect a 5.1
home theatre system directly to the external device's digital audio output connector.
" If an external device has been set up for both Anynet+ and a universal remote control, the device can be controlled only
with the universal remote control.
Controlling the TV with a Keyboard, Mouse, or Gamepad
Connecting a keyboard, mouse or gamepad to make it easier to control the TV.
Settings General External Device Manager Input Device Manager Try Now
You can connect a keyboard, mouse or gamepad to make it easier to control the TV.
Connecting a USB keyboard, mouse, or gamepad
Plug the keyboard, mouse or gamepad cable into the USB port.
" If you connect a mouse, it is available only in the Internet app and Remote Access function.
" XInput USB gamepads are supported.
" For more information, refer to Input Device in Connection Guide ( Source Connection Guide Input Device).
Connecting a Bluetooth keyboard, mouse, or gamepad
Settings General External Device Manager Input Device Manager Bluetooth
Device List
" This function may not be supported depending on the model or geographical area.
" If your device was not detected, position the keyboard close to the TV, and then select Refresh. The TV scans for available
devices again.
" If you connect a mouse, it is available only in the Internet app.
" For more information about how to connect a Bluetooth device, refer to the Bluetooth device's user manual.
To Next Page
Loading...
